Steam Mop

Only use it if both the steam-mop manual and the flooring maker allow steam on that sealed laminate; some manufacturers warn that heat and moisture can damage laminate. Tile and other sealed hard floors are the safer starting case ([Black+Decker guidance](https://www.blackanddecker.com/blogs/evergreen-faqs/what-floors-should-not-be-steam-mopped)).

Steam can loosen dirt in tile and grout, but a pass is not automatically a disinfecting treatment. Sanitizing depends on the machine's temperature, contact time, and the surface, so follow the manual instead of assuming every quick pass kills germs.

Usually no: use the water type named in the mop manual and do not add cleaner unless the manufacturer explicitly allows it. Additives can clog the heater or damage seals, while one manufacturer safety guide specifically warns to put nothing except water in the tank ([H2O guide](https://support.thanedirect.co.uk/f/H2OiGO_MNL_ENG_R0_220506.pdf)).

Vacuum or sweep first so grit does not drag across the floor, then attach a clean microfiber pad and keep the mop moving. Empty the tank and remove the damp pad after cleaning, because leaving moisture on a floor can damage it ([Shark FAQ](https://sharkcleanapac.zendesk.com/hc/en-au/articles/15981814757647-S7001-Shark-Steam-and-Scrub-Mop-FAQ)).